US Robotics x2/56K Instructions d'exploitation télécharger pdf (Page 55)

INSTALLING OTHER FAX/DATA SOFTWARE

Flow Control

• For hardware flow control (highly

recommended), select RTS/CTS.

• For software flow control, select

XON/XOFF.

NOTE: You may need to disable the

type of flow control (hardware or

software) that you are not using.

UART (External Modems)

If you are running Windows 3.x or you have

upgraded your system from Windows 3.x to

Windows 95, you can run MSD to determine

your UART setting. In DOS, type MSD at the

Windows directory prompt and then press

ENTER. Follow the on-screen instructions to

access the COM port settings panel. In this

panel you should find the UART chip used.

Match the UART type listed in MSD with the

serial rate listed in the chart below. Select this

serial rate (sometimes called the “port rate”) in

any communications software you use.

Select this

If this is your UART... serial rate

16550* 115.2 or

57.6 kbps

16450 38.4 kbps

8250 19.2 kbps

*All U.S. Robotics internal modems have a 16550

UART.

NOTE: DO NOT select a 28,800,

14,400, or 12,000 bps serial port rate, if

offered. Your modem will NOT work

correctly with any of these settings. Fix

or lock the serial port (baud) rate (if it’s

referred to as autobaud, select OFF).

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 114 115

Pas de commentaire

US Robotics x2/56K Instructions d'exploitation Page 55