US Robotics x2/56K Instructions d'exploitation télécharger pdf (Page 20)

INTERNAL MODEM INSTALLATION WITH WINDOWS 3.X

5. Holding the modem at each corner, with the

gold edge facing the slot, push the modem

down as gently as possible until it snaps into

the expansion slot. (The drawings show

horizontally aligned expansion slots. Some

computers have vertically aligned slots. The

instructions apply to both styles.)

You need to apply a little pressure to seat

the modem properly. Sometimes a gentle

back-and-forth motion helps to fit the

modem all the way into the slot. If you feel

resistance, the modem may not be properly

lined up with the slot. Do not force it into

the slot. Remove the modem and try again.

6. Once the modem is in the slot, fasten it

firmly into place using the screw that you

removed in step 4.

7. Replace the computer’s cover and fasten it

with the screws you removed in step 3.

8. If you currently have a phone plugged into

the wall jack you plan to use for the

modem, disconnect the phone’s cord from

the jack.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 114 115

Pas de commentaire

US Robotics x2/56K Instructions d'exploitation Page 20