US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manuel d'utilisateur télécharger pdf (Page 76)

56K Softmodem

Command Reference

- 68

OK if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146 and the

connection is established. This is a final result code.

ERROR if <mod> does not equal 3, 24, 48, 72—74, 96—98, 121, 122,

145, 146 or the connection is not established. This is a final result code.

Table 4-14: +FTM Commands

Table 4-15: +FTM Extended Syntax Commands

+FTS=<value>—Transmission Silence

+FTS=<value> causes the modem to terminate a transmission and wait for

<value> x 10 ms before responding with the OK result code. For example,

<value> = 5 results in a 50 ms interval. <value> has a range of 0—255.

Result codes:

OK if <value> = 0—255.

ERROR if <value> does not equal 0—255.

Command Modulation Speed

+FTM=3 V.21 channel 2. 300 bits/s.

+FTM=24 V.27ter. 2400 bits/s.

+FTM=48 V.27ter. 4800 bits/s.

+FTM=72 V.29. 7200 bits/s.

+FTM=96 V.29. 9600 bits/s.

+FTM=73 V.17. 7200 bits/s.

+FTM=74 V.17 (short train). 7200 bits/s.

+FTM=97 V.17. 9600 bits/s.

+FTM=98 V.17 (short train). 9600 bits/s.

+FTM=121 V.17. 12000 bits/s.

+FTM=122 V.17 (short train). 12000 bits/s.

+FTM=145 V.17. 14400 bits/s.

+FTM=146 V.17 (short train). 14400 bits/s.

Command Description

+FTM=<mod> Sets FAX transmit rate.

+FTM=? Displays all available para meter values for the +FTM command.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 107 108

Pas de commentaire

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manuel d'utilisateur Page 76