US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manuel d'utilisateur télécharger pdf (Page 72)

56K Softmodem

Command Reference

- 64

Table 4-7: +FPR Extended Syntax

+FRH=<mod>—Receive HDLC Data with <mod> Carrier

Use the +FRH command to instruct the modem to receive data framed in the

HDLC protocol at the modulation defined by Table 4-8: +FRH Commands on page

65.

Result codes:

CONNECT if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146 and the

connection is established. This is an intermediate result code.

OK if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146 and the connection

is established. This is a final result code.

ERROR if <mod> does not equal 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146 or

the connection is not established. This is a final result code.

DTE Command Description

+FPR=<value> Does not perform any particular action in soft modem based systems.

+FPR? Does not perform any particular action in soft modem based systems.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 107 108

Pas de commentaire

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manuel d'utilisateur Page 72