US Robotics 56K USB MODEM - QUICK REV 2.0 Spécifications télécharger pdf (Page 9)

TechMemo 01-0011B August 26, 2004

9 of 24

5. From the Site Manager screen, click File > New Site. Set up the new site as shown below. Then click OK:

6. With the Modem Test site selected, click Messages > Edit. Then type a short message in the AlphaNET

Message Editor window that appears:

7. Send the test message to the sign by clicking File > Transmit > To Selected Sites > OK:

8. If the test message does not appear on the sign, make sure the transmitting modem is on and connected to

the appropriate COM port on your computer. Also, try turning the sign off and then on again.

Site Name — name this new site

Modem Test.

Compatibility — see “Alpha and

AlphaEclipse sign data formats” on

page 13.

Use an Editor transmit site — check

this.

Connection Device = the modem

connection device you previously

created.

Phone Number — the telephone

number of the receiving modem. This

can include “9” and an area code if

necessary.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Pas de commentaire

US Robotics 56K USB MODEM - QUICK REV 2.0 Spécifications Page 9