US Robotics 7931 Guide de l'utilisateur télécharger pdf (Page 54)

30 Sun StorageTek SAM Archive Configuration and Administration Guide • Version 4, Update 6, 04/07

2. Wait until the system completes its current task, sets the status to off, and

transfers the current active catalog to the historian.

3. Unlock and open the door to the automated library.

4. Remove the cartridges from their respective slots.

5. Close and lock the door to the automated library.

The automated library reinitializes and scans the cartridges in the automated library.

The system updates the library catalog with the VSNs of the cartridges currently in

library slots. The VSNs of the removed cartridges are removed from the library

catalog and are now recorded only in the historian file. The automated library state

is set to on.

▼ To Enable Load Notification

The Sun StorageTek SAM software requests cartridges to be loaded regularly to

satisfy archiving and staging needs. If the request is for a cartridge that resides

inside a library, the request is handled automatically. If the request is for a cartridge

that resides outside the library, operator action is required. If enabled, the

load_notify.sh script sends email when a cartridge needs to be obtained from

outside the library.

1. Become superuser.

2. Use the cp(1) command to copy the load notification script from its installed

location to its operable location.

For example:

3. Use more(1) or another command to examine the defaults.conf file.

Make sure that the following directives are in the file and appear as follows:

■ exported_media=available

■ attended=yes

These directives are set by default. If the load notification capability is to be enabled,

ensure that these directives have not been changed.

4. Modify the load_notify.sh script to send notices to the operator.

By default, the script sends email to root, but it can be edited to send email to

another person, to dial a pager, or to provide some other means of notification.

# cp /opt/SUNWsamfs/examples/load_notify.sh

/etc/opt/SUNWsamfs/scripts/load_notify.sh

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 287 288

Pas de commentaire

US Robotics 7931 Guide de l'utilisateur Page 54