US Robotics USR7500 Manuel d'utilisateur télécharger pdf (Page 3)

Installation

NOTE: The first time the keyboard is used you will need to install two

AAA alkaline batteries (not included).

Step 1 – Prepare the keyboard

• Turn the keyboard to the ON position.

• Press the pair (connect) button; the green LED on the top will flash

when in pairing mode.

• The keyboard is now ready to connect with a Bluetooth ready

system.

pair/connect button

Step 2 – Connect to a Bluetooth ready system

• On the Bluetooth ready system turn Bluetooth ON

• The device should detect the keyboard and provide a way to pair

the device. This will include a code or pin that will need to be typed

onto the keyboard to finish the pairing process.

Detailed installation instructions immediately

follow the Keyboard Character Map.

Note: If no signal is received after 10 minutes or the connected device

is turned off, the keyboard will revert to Standby Mode. To reactivate

the keyboard, click the Enter key on the keyboard.

1 2 3 4 5 6 7 8 ... 18 19

Pas de commentaire

US Robotics USR7500 Manuel d'utilisateur Page 3