US Robotics 56K MESSAGE MODEM - QUICK FOR WINDOWS Guide de l'utilisateur télécharger pdf (Page 15)

User’s Guide 11

How to Connect the Modem

1. Turn off your computer and any attached devices, such as a printer.

2. Connect the serial cable to the modem and to the computer. When

looking for the serial port label on the back of your computer, look

for ports labelled COM, MODEM, RS-232, or SERIAL. DO NOT

select AUX, GAME, LPT, or PARALLEL.

NOTE: Remember which serial port you selected. This

information will be necessary when installing your communications

software.

3. Plug the power adapter into the power socket on the modem and

into a standard wall outlet.

4. Plug one end of the phone lead into the modem telephone socket. It

is labelled with a wall plug icon on the bottom of the case. Plug the

other end into a phone wall socket.

WARNING: The phone socket you use must be for an

ANALOGUE phone line. Most office phones are wired through

DIGITAL lines. Be sure you know what type of line you have.

The modem will be damaged if you use a digital phone line.

5. If you wish to use your modem and phone through the same phone

wall socket, plug your phone's lead into the modem's phone socket.

It is labelled with a phone icon on the bottom of the case. Use an

adapter cable if necessary.

NOTE: You cannot use the modem and phone at the same time if they

are sharing a line.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 74 75

Pas de commentaire

US Robotics 56K MESSAGE MODEM - QUICK FOR WINDOWS Guide de l'utilisateur Page 15